Lincoln Electric SVM189-B service manual Technical Specifications Magnum 100SG Spool GUN K2532-1

Return to Section TOC

Return to Section TOC

Return to Master TOC

Return to Master TOC

C-5		ACCESSORIES		C-5
TECHNICAL SPECIFICATIONS - MAGNUM 100SG SPOOL GUN K2532-1
	MODEL		K2532-1 Magnum 100SG Spool Gun
	WELDING PROCESS		Aluminum GMAW (MIG), DC electrode positive polarity with
			100% argon welding shielding gas.
	WIRE ALLOYS		Aluminum only: alloys 4043 or 5356
	WIRE SIZES (DIAMETERS)		Solid wire 0.030 or 0.035 inches (0.8 or 0.9 mm)
	SPOOL SIZE		1 lb. weight, nominal 4 inch diameter spool
	RATED WELDING CURRENT		130 amps at 30% for 10-minute basis
	AND DUTY CYCLE
	OVERALL WEIGHT		3.5 lbs. with cable but without case or spool
	CABLE LENGTH		10.0±0.2 feet
	OVERALL SIZE (BOUNDING BOX)		In inches: 15.75 long x 10.50 high x 4.25 thick max.,
			without case or gun cable.
	METHOD OF GUIDANCE		Semiautomatic (manually-guided)
	METHOD OF COOLING		Air-cooled

Return to Section TOC

Return to Master TOC

UNPACKING THE SPOOL GUN

The spool gun is factory-assembled and tested, and then packed in its own cushioned carrying case. It is shipped fully-equipped to weld with 0.035 inch diame- ter aluminum wire. After opening the case, check that it contains the following items:

1.One fully assembled K2532-1 spool gun with (1) T11862-65 Conical Compression Spring for use with alloy 5356 wire; wire spool not installed.

2.One spool of 0.035 aluminum alloy 4043 wire

3.Three S19726-3 contact tips

4.One instruction manual (IM913)

5.One M21182 electrical harness with toggle switch.

1

2

3

4

Return to Section TOC

Return to Master TOC

5

COMPACT WIRE WELDERS