Mounting the Switch

Return to Section TOC

Return to Master TOC

Return to Section TOC

Return to Master TOC

15. Remove the plug button from the panel hole.

16. Plug button is no longer needed. Discard.

17, Remove mounting nut from switch. Keep mount- ing nut for installation.

18. Install switch into panel hole. Ensure washer tab

is fully seated into smaller hole. 19. Reinstall mounting nut onto switch.

Wrench tighten.

RE-ASSEMBLE MACHINE AS FOLLOWS:

20.Reinstall screw into plastic handle (if so equipped).

21.Reinstall cover.

22.Reinstall door.

23.Reconnect input power to the machine