Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
TROUBLESHOOTING AND REPAIR | ||
|
STATOR REMOVAL AND REPLACEMENT PROCEDURE (continued)
FIGURE F.20 – STATOR LOCATION
TOLERANCE RING
STATOR
10.Check the air gap between the rotor and the stator. Feeler gages are inserted between the rotor and stator through the brush access opening. A .010 gage should be able to pass completely through the air gap and a .030 gage should not penetrate the air gap any far- ther than any tapered portion on the end of the gage.
11.Reinstall the control box and fuel tank previ- ously removed.
12.Replace the case wraparound cover.
