Linksys WAG54GP2 manual Configuring the Gateway Setup Tab

Wireless-G ADSL Gateway with 2 Phone Ports

IP Settings. Follow the instructions in the section for your type of encapsulation.

Select Obtain an IP Address Automatically if you are connecting through a dynamic IP address. If you are required to use a permanent (static) IP address to connect to the Internet, select Use the following IP Address.

•Internet IP Address. This is the Gateway’s IP address, when seen from the Internet. Your ISP will provide you with the IP Address you need to specify here.

•Subnet Mask. This is the Gateway’s Subnet Mask. Your ISP will provide you with the Subnet Mask.

•Gateway. Your ISP will provide you with the default Gateway Address, which is the ISP server’s IP address.

•Primary DNS. (Required) and Secondary DNS (Optional). Your ISP will provide you with at least one DNS (Domain Name System) Server IP Address.

•PPPoE Session. To connect using a PPPoE Session, select Enable from the drop-down menu. Configure the Service Name, User Name, and Password settings provided by your ISP. Enter the domain name in the Match Domain Name field.

Connect on Demand. If you want the Router to end the Internet connection after it has been inactive for a period of time, select Connect on Demand and designate the number of minutes you want that period of inactivity to last.

Keep Alive. If you want the Router to periodically check your Internet connection, select Keep Alive. Then specify how often you want the Router to check the Internet connection. If the connection is down, the Router will automatically re-establish your connection.

When finished making your changes on this tab, click the Save Settings button to save these changes, or click the Cancel Changes button to undo your changes.

Chapter 4: Configuring the Gateway 16

The Setup Tab