Linksys WAG54GP2 manual Back Panel, Power

Wireless-G ADSL Gateway with 2 Phone Ports

Chapter 2: Getting to Know the Wireless-G ADSL Gateway with 2 Phone Ports

The Back Panel

The Gateway’s ports, where a network cable is connected, are located on the back panel. The Gateway’s Reset button is also located on the back panel.

Figure 2-1: Back Panel

LINE The LINE port connects to the ADSL line.

Phone (1 and 2) The Phone ports connect to phones you wish to connect to your network.

Ethernet (1-4) The Ethernet ports connect to your computer and other network devices.

Reset Button There are two ways to Reset the Gateway's factory defaults. Either press the Reset Button, for approximately ten seconds, or restore the defaults from the Factory Defaults screen of the Administration tab in the Gateway’s Web-Based Utility.

Important: Resetting the Gateway to factory defaults will erase all of your settings (WEP Encryption, Wireless and Wired network settings, etc.) and replace them with the factory defaults. Do not reset the Gateway if you want to retain these settings.

Power The Power port is where you will connect the power adapter.

Chapter 2: Getting to Know the Wireless-G ADSL Gateway with 2 Phone Ports 6

The Back Panel