Installation
Figure 2-1. Software Install Menu
3.Insert the tape labeled
4.Select:
>Tape drive
The system displays the message:
Insert a tape into the Tape Drive. Type [go] when ready
or [q] to quit: (default: go)
5. Press ENTER to go ahead with the install. The system displays the message:
Installation in progress. Do not remove the tape.
The following packages are available:
1 ELA | Enhanced List Application Package |
Select package(s) you wish to process (or ‘all’ to process all packages). (default: all) [?, ??, q].
NOTE:
If you receive a device open failure message, the tape was inserted after you selected Tape Drive or the system did not see the tape. In that case, complete step a through step d below.
a.Enter q
The system displays the Software Install menu (Figure
b.Remove the tape from the tape drive.
c.
d.Repeat step 4 and step 5.
10Issue 1 July 1997
