M-Audio Axiom Pro manual Edit Mode Group Slider

Axiom Pro User Guide 40

Edit Mode > Group (Slider)

press 3 press S

Axiom Pro 49/61

Press the Edit Mode button, select option number 3 and then press “S” to open the Slider Group page.

The Edit Mode > Group (Slider) page displays parameters relating to the Sliders.

You can select one of the other groups of controls for editing by pressing the “N” “S” “E” and “P” group buttons on Axiom Pro 49/61 or the “Play” and “Record” buttons to select the encoder and pad groups on Axiom Pro 25.

Note that this section of the User Guide covers the Slider group (the other groups are covered in the preceding and following sections of this guide).

✓Tip:

You can directly access this page by first moving any of the sliders, pressing the Edit Mode button and selecting option number 3.

Parameter:	Name
Value Range:	(varies)
	This parameter lets you name the slider group. Note that this name only appears within the
	Axiom Pro controller and does not affect your audio application in any way.
	To learn more about entering or changing Name parameters, see the box titled “Editing Name
	Parameters” in the “Edit Mode > Control” section.

Parameter:	Channel
Value Range:	Global, 1-16, Zone 1-4
	This parameter sets the MIDI output channel of the slider group. The parameter can be set in the
	following ways:
	•	Global	This sets the “group” MIDI channel for the sliders to the same channel as specified
			on the Edit > Global page.
	•	1-16	This sets the “group” MIDI channel for the sliders to a channel between 1 and 16.

•Zone 1-4This sets the “group” MIDI channel for the sliders to the same channel as used by the selected keyboard zone (1 through 4). See Edit Mode > Zones > Data to learn how to set these output channels.