Axiom Pro User Guide |
|
| 39 |
Parameter: | Channel |
| |
Value Range: | Global, | ||
| This parameter sets the MIDI output channel of the encoder group. The parameter can be set in the | ||
| following ways: |
| |
| • | Global | This sets the “group” MIDI channel for the encoder knobs to the same channel as |
|
|
| specified on the Edit > Global page. |
| • | This sets the “group” MIDI channel for the encoder knobs to a channel between | |
|
|
| 1 and 16. |
| • | Zone | This sets the “group” MIDI channel for the encoder knobs to the same channel as |
|
|
| used by the selected keyboard zone (1 through 4). (see Edit Mode > Zones > Data |
|
|
| to learn how to set these output channels). |
Parameter: | Accel. Max |
Value Range: | |
| When the Axiom Pro encoders are turned slowly, their associated parameters update in single- |
| step increments. However, as the encoders are turned quickly the parameters update in |
| increments and let you make large changes with only one or two fast turns of an encoder. |
| The Accel.Max setting determines the maximum speed at which parameters will update as an |
| encoder is turned quickly. The default setting is “5” To make encoders more precise (but less |
| sensitive) at high speed, reduce this setting. Conversely, to make encoders more sensitive (but less |
| precise) at high speeds, increase this setting. |
Parameter: | |
Value Range: | (varies) |
| Encoder knob and drum pad groups can up to four profiles allowing you to quickly and easily control |
| up to 32 parameters. When viewing this page in Edit Mode, a selected profile can be enabled and |
| disabled using the “+” and |
| selected profile. |
| To learn more about entering or changing Name parameters, see the box titled “Editing Name |
| Parameters” in the “Edit Mode > Control” section. |
