Axiom Pro User Guide |
|
| 45 |
Parameter: | MIDI Port | ||
Value Range: | O, A, A&O, B, B&O, A&B, All, Off | ||
| Each of the four zones can be individually configured to transmit MIDI data on any combination of | ||
| Axiom Pro ports: | ||
| • A | Axiom Pro 6111 USB A | |
| • B | Axiom Pro 6111 USB B | |
| • O | Axiom Pro 6111 MIDI Out (External MIDI port) | |
| • | All | MIDI data is transmitted on all ports |
| • | Off | MIDI data is not transmitted |
Parameter: | Program |
Value Range: | |
| This parameter sends Program Change MIDI messages on your selected keyboard zone’s MIDI |
| output channel when an Axiom Pro patch is loaded. Note that Program Change messages are only |
| sent on active zones. Please see the “Edit Mode > Zones” section of this guide to learn how to |
| activate/deactivate zones. |
Parameter: | BankLSB |
Value Range: | |
| This parameter sends Bank LSB messages on |
| your selected zone’s MIDI output channel when |
| an Axiom Pro patch is loaded. Note that Bank |
| LSB messages are only sent on active zones and |
| will not have any effect until a Program Change |
| message is sent. |
✓NOTE: If you load an Axiom Pro patch containing program change, bank LSB, or bank MSB messages for the zones, each zone will transmit its assigned program change or bank LSB/MSB message when the patch is loaded. If you would like to load a patch without sending these messages, make sure that the keyboard icon is unchecked on the Load page. Please see the “Loading Patches” section in the “Saving and Loading your Axiom Pro Patches” chapter to learn more about this topic.
Parameter: | BankMSB |
Value Range: | |
| This parameter sends Bank MSB messages on your selected zone’s MIDI output channel when an |
| Axiom Pro patch is loaded. Note that Bank MSB messages are only sent on active zones and will |
| not have any effect until a Program Change message is sent. |
11The 25 and
