M-Audio Axiom Pro manual Loading Patches

Axiom Pro User Guide 20

Loading Patches:

To load a saved patch:

1.Press the Load button. The button becomes illuminated and the Load page is displayed on the LCD.

2.Turn Encoder knob E5 to select the patch that you would like to load.

✓TIP: Axiom Pro 49/61 users can also use the +/- buttons or enter the patch number using the numerical keypad.

3.By default, all of the controller groups of Axiom Pro (i.e., the encoder knobs, drum pads, etc.) will be loaded from the saved patch. If you would like to load a new patch but keep the current settings of a group:

a.Axiom Pro 49/61 users: Press the “N,” “S,” “E,” and “P” buttons 3 to uncheck

the Number, Slider, Encoder, and Pad groups. Axiom Pro 25 users: Press the Record and Play buttons to uncheck the encoder and pad groups, respectively.

b.Use Soft Keys 2-3 to uncheck the Keyboard and Transport Control groups, respectively

4.Press Soft Key 4 (Load) to load the patch and return to Performance mode.

Soft Key 1 (Exit) can be pressed at any time to exit this page without loading a patch.

When a new Axiom Pro patch is recalled, the Program change and Bank LSB/ MSB settings of the newly loaded patch are also recalled. If you would like to load a new Axiom Pro patch without transmitting Program Change and Bank LSB/MSB messages, use Soft-Key 2 to ensure that the keyboard group is not checked.

3NOTE: Since Axiom Pro 25 does not feature sliders (“S”) or a numerical keypad (“N”), these groups will not appear on the Load Page.