Dual backup memory function

The unit stores settings information in nonvolatile memory even when the main power supply is turned off. Using the Dual Backup Memory function, you can write settings information to another memory area to back up saved settings for recovery anytime as needed. Remembering set details (Backup).

BACK

DISPLAY ZONE SELECTnnRemembering set details (Backup)

Set the unit in the state you want remembering, and press and hold DISPLAY and ZONE SELECT for at least 3 seconds.

“MEMORY SAVING” is shown in the display, and the setting details are remembered.

NOTE

•The volume is not remembered.

•If remembered details are overwritten, the previously remembered contents are deleted.

Panel lock function

To prevent accidental operation of this unit, you can disable operation of the buttons on the front panel.

BACK ui ENTERXON/STANDBYnnDisabling all key button operations

1 Press X ON/STANDBY while you press and hold BACK and ENTER with the unit in standby mode.

2 Press uito select “FP/VOL LOCK ON”.

3 Press ENTER to enter the setting.

All button operations except X ON/STANDBY are disabled.

version Basic

version Advanced

Information

nnRecalling remembered details (Recovery)

nnDisabling all button operations except VOLUME

Press and hold BACK and ZONE SELECT together for at least 3 seconds.

“MEMORY LOAD” is shown in the display, and the remembered details are recalled.

NOTE

•If there is no remembered data, “NO BACKUP” is shown in the display, and no remembered details are recalled.

•As the volume cannot be recalled, it returns to the factory setting volume.

DVD

97

1 Press X ON/STANDBY while you press and hold BACK and ENTER with the unit in standby mode.

2 Press uito select “FP LOCK ON”.

3 Press ENTER to enter the setting.

All button operations except X ON/STANDBY and VOLUME are disabled.

v See overleaf