Marantz AV7701 Tone, Dialogue Level

Setting items	Setting details
Center Width	0 – 7 (3)
Distributes the dialogue	The smaller the value, the more dialogue is concentrated on the center
output from the center
	channel. The larger the value, the more dialogue is distributed to front
channel to left and right
	left and right channels, and the more the sound image widens in the
channels and widens the
	front.
sound image in the front.
You can set this when the
sound mode is Dolby PLgx
in the “Music” mode.
Height Gain	Low : Reduce the front height channel volume.
Control the front height	Normal : Front height channel sound is output with standard sound
channel volume.	volume.
	High : Increase the front height channel volume.

	NOTE
	“Height Gain” is displayed for the following settings.
	• When the “Speaker Config.” – “Front Height” setting (vpage 128) is
	set other than to “None”.
	• When sound mode is “PLgz” or the PLgz decoder is used.
Speaker Select	Surround Back : Sound is output from the surround back speakers.
Make settings for the	Height : Sound is output from the front height speakers.
speakers outputting sound	Wide : Sound is output from the front wide speakers.
when playing back in original	Off : Sound is not output from the surround back speakers, front wide
surround mode.	speakers and front height speakers.

	NOTE
	Only speakers that are set to something other than “None” in “Speaker
	Config.” (vpage 127) can be selected.
Set Defaults	Yes : Reset to the defaults.
The “Surround Parameter”	No : Do not reset to the defaults.

settings are returned to the	When you select “Set Defaults” and press
default settings.
	ENTER, the “Reset to the default values?”
	prompt is displayed. Select either “Yes” or
	“No”, and press ENTER.

	Audio
Tone	Default settings are underlined.

Adjust the tonal quality of the sound.

Setting items	Setting details
Tone Control	On : Allow tone adjustment (bass, treble).

Set the tone control function Off : Playback without tone adjustment.
to “On” and “Off”.	“Tone Control” can be set when “Dynamic EQ” (vpage 113) is set
	to “Off”.

NOTE

•“Tone Control” settings are not reflected to ZONE2 and ZONE3.

•The tone cannot be adjusted in the “DIRECT” or “PURE DIRECT” mode.

Bass	–6dB – +6dB (0dB)
Adjust bass.	“Bass” can be set when the menu “Tone Control” setting is “On”.
Treble	–6dB – +6dB (0dB)
Adjust treble.	“Treble” can be set when the menu “Tone Control” setting is “On”.
Dialogue Level	Default settings are underlined.

Sets the output level to clarify the dialogue output from the center channel.

Setting items	Setting details
Dialogue	–12.0dB – +12.0dB (0dB)

version Basic

version Advanced

Information

DVD 110