| Hide Sources | Default settings are underlined. |
Remove from the display input sources that are not used.
Setting details
CBL/SAT / DVD /
•Show : Use this source.
•Hide : Do not use this source.
NOTE
•Input sources being used in the MAIN ZONE, ZONE2 or ZONE3 cannot be selected.
•Input sources being used in the various zones cannot be deleted.
•Input sources set to “Hide” cannot be selected using the input source select button.
| Source Level | Default settings are underlined. |
|
|
•This function corrects the playback level of the selected input source’s audio input.
•Make this setting if there are differences in the input volume levels between the different sources.
Setting details
The analog input level and digital input level can be adjusted independently for input sources for which “DIGITAL” is assigned at “Input Assign” (vpage 122).
| Inputs |
| Input Select | Default settings are underlined. |
Set the audio input mode and decode mode of each input source.
The input modes available for selection may vary depending on the input source.
Setting items |
| Setting details |
|
|
| ||
Input Mode | Auto : Automatically detect input signal and perform playback. | ||
Set the audio input modes | HDMI : Play only signals from HDMI input. |
| |
for the different input | Digital : Play only signals from digital input. |
| |
sources. | Analog : Play only signals from analog input. |
| |
It is normally recommended | 7.1CH IN : Only signals input from the 7.1CH IN connector will be played | ||
to set the audio input mode | back. |
|
|
to “Auto”. |
|
|
|
| • “Digital” can be set for input sources for which “DIGITAL” is assigned | ||
| at “Input Assign” (vpage 123). |
| |
| • If the input source is set to “CBL/SAT”, “DVD”, | ||
| PLAYER”, “CD” or “PHONO”, it can be set to “Analog”. | ||
| • When digital signals | are properly input, the | indicator lights on |
| the display. If the | indicator does not light, check “Input Assign” | |
| (vpage 122) and the connections. |
| |
| • If “HDMI Control” is set to “On” and a TV compatible with the ARC is | ||
| connected via the HDMI MONITOR connectors, the input mode whose | ||
| input source is “TV” is fixed to ARC. |
| |
| • The surround mode cannot be set if the input mode is set to “7.1CH IN”. | ||
Decode Mode | Auto : Detect type of digital input signal and decode and play automatically. | ||
Set the audio decode mode | PCM : Decode and play only PCM input signals. |
| |
for input source. | DTS : Decode and play only DTS input signals. |
| |
version Basic
version Advanced
Information
CBL/SAT DVD
AUX1 AUX2
MEDIA PLAYER 
CD
TV AUDIO
•This item can be set for input sources for which “DIGITAL” is assigned at “Input Assign” (vpage 122).
•Normally set this mode to “Auto”. Set “PCM” and “DTS” when inputting the corresponding input signal.
DVD | 124 |