The menu is displayed on the TV screen.

Network

To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network (LAN) via DHCP, set “DHCP” to “On” (use the default setting). This allows this unit to use your home network (LAN).

If you assign an IP address for each device, you must use the “IP Address” setting to assign an IP address to this unit and enter the information about your home network (LAN) such as the gateway address and subnet mask.

Menu operation

1 Press ZONE SELECT to switch “MAIN”.

2 Press SETUP.

3 Use uito select the menu to be set or operated.

4 Press ENTER or pto enter the setting.

• To return to the previous item, press o or BACK.

• Exiting the Menu, press SETUP while the menu is displayed. The menu display disappears.

Items that can be set with the “Network” procedure

Information (vpage 131)

IP Control (vpage 131)

Friendly Name (vpage 131)

Settings (vpage 132)

Maintenance Mode (vpage 133)

version Basic

version Advanced

Information

DVD

130