Connecting to a home network (LAN)

You can connect this unit to your home network (LAN) to perform various types of playbacks and operations as follows. Make network connections for this unit by carefully reading information on this page.

•Playback of network audio such as the Internet radio and music servers

•Playback of music from online services

•AirPlay

•Operations on this unit via the network

In addition, when an updated firmware becomes available for improving this unit, the update information is delivered from us to this unit over the network. You can then download the latest firmware.

For more information, on the menu, select “Update” (vpage 138).

Network settings are necessary. See “Network” on the menu (vpage 130) for more information on network setting.

 

 

NAS

 

 

(Network Attached

 

PC

Storage)

 

 

Modem

 

 

Internet

 

 

To WAN side

 

 

To LAN port

 

 

To LAN port

LAN port/

LAN port/

 

Ethernet

Ethernet

 

connector

connector

Router

Required systemnnBroadband internet connection nnModem

Device that connects to the broadband circuit and conducts communications on the Internet. A type that is integrated with a router is also available.

nnRouter

When using this unit, we recommend you use a router equipped with the following functions:

•Built-in DHCP server

This function automatically assigns IP addresses on the LAN.

•Built-in 100BASE-TX switch

When connecting multiple devices, we recommend a switching hub with a speed of 100 Mbps or greater.

nnEthernet cable(CAT-5 or greater recommended)

•Use only a shielded STP or ScTP LAN cable which is available at retailer.

• The normal shielded-type Ethernet cable is recommended. If a flat-type cable or unshielded-type cable is used, other devices could be affected by noise.

•If you have an Internet provider contract for a line on which network settings are made manually, make the settings at “Network” (vpage 130).

•With this unit, it is possible to use the DHCP and Auto IP functions to make the network settings automatically.

•When using this unit with the broadband router’s DHCP function enabled, this unit automatically performs the IP address setting and other settings.

When using this unit connected to a network with no DHCP function, make the settings for the IP address, etc., at “Network” (vpage 130).

•When setting manually, check the setting contents with the network administrator.

NOTE

•A contract with an ISP is required to connect to the Internet.

No additional contract is needed if you already have a broadband connection to the Internet.

•The types of routers that can be used depend on the ISP. Contact an ISP or a computer shop for details.

•marantz assumes no responsibility whatsoever for any communication errors or troubles resulting from customer’s network environment or connected devices.

•This unit is not compatible with PPPoE. A PPPoE- compatible router is required if you have a contract for a type of line set by PPPoE.

•Do not connect an NETWORK connector directly to the LAN port/ Ethernet connector on your computer.

•To listen to audio streaming, use a router that supports audio streaming.

version Basic

version Advanced

Information

For connections to the Internet, contact an ISP (Internet Service Provider) or a computer shop.

DVD

27