Marantz AV7701 Press ZONE SELECT, Set up “Channel Select”, nnAudio output from each PRE OUT terminal

Set up speakers

This section describes detailed settings for Audyssey® Setup.

Connecting the Pre Tuner, Power Amplifier and your TV.

Before Audyssey® Setup measurement, the settings shown below can be made.

•Setting the channels to be used (Channel Select)

If channels that are not to be used are set in advance, measurement for the set channels is skipped, and measuring time can be reduced. You can also change the number of surround back speakers (vpage 88 “Set up “Channel Select””).

nnAudio output from each PRE OUT terminal

					PRE OUT Channel
UNBALANCED	FL/FR	C	SW1/SW2		SL/SR	SBL/SBR	HL/HR	WL/WR
PRE OUT terminal
BALANCED PRE	FL/FR	C	SW1/SW2		SL/SR	SBL/SBR	---	---
OUT terminal
Audio Output	Front	Center	Subwoofer 1	/	Surround	Surround Back	Front Height	Front Wide
			Subwoofer 2

version Basic

version Advanced

1	Set up the
	remote control unit

nn Set up the zone mode

Press ZONE SELECT to switch “MAIN”.

Press ZONE SELECT

2 Connect the setup microphone.

When the setup microphone is connected, the following screen is displayed.

3 Set up “Channel Select”

Use ui to select “Channel Select”, and then press

ENTER.

Audyssey Setup

Your AV preamp can automatically measure the acoustics of your room then optimize your speakers using the included microphone.

Set the following items if necessary.

Channel Select

Start

Information

NOTE	Audyssey Setup
	Your AV preamp can automatically measure the acoustics of
When using a remote control with preset codes registered	your room then optimize your speakers using the included
	microphone.
(vpage 143), press AVR to set the remote control to the AVR-	Set the following items
	if necessary.

operation mode before operation.

Channel Select

Start

DVD 88

Channel Select
Subwoofer	Measure
Surround Back	Measure (2 spkrs)
Front Height	Measure
Front Wide	Measure

v See overleaf