4 Use uito select a channel, and then press ENTER.
Subwoofer Select for no subwoofers to be used. In this case, go to step 5.
Surround Select the number of surround back speakers to be
Back used. In this case, go to step 6.
Front Select for no front height speakers to be used. In this Height case, go to step 7.
Front Wide Select for no front wide speakers to be used. In this case, go to step 8.
5 Use opto set whether or not a subwoofer channel is measured, and then press ENTER.
Measure Set for measuring a subwoofer.
Skip Set for no measuring of a subwoofer.
6 Use o p to set whether or not a surround back channel is measured, and then press ENTER.
| Measure | Set for measuring two surround back speakers. |
| (2 spkrs) | |
|
|
|
| Measure | Set for measuring a surround back speaker. |
| (1 spkr) |
|
|
|
|
| Skip | Set for no measuring of a surround back speaker. |
|
|
|
DVD
7 Use opto set whether or not a front height channel is measured, and then press ENTER.
Measure Set to measure the front height speakers.
Skip Set when you do not want to measure the front height speakers.
8 Use opto set whether or not a front wide channel is measured, and then press ENTER.
Measure Set to measure the front wide speakers.
Skip Set when you do not want to measure the front wide speakers.
9 Press oor BACK.
Proceed to page 31 Preparation step 5.
89
Set up speakers
NOTE
After performing Audyssey® Setup, do not change the speaker connections or subwoofer volume. In event of a change, perform Audyssey® Setup again.
version Basic
version Advanced
Information