Panel lock function
nnCanceling the Panel lock function1 Press X ON/STANDBY while you press and hold BACK and ENTER with the unit in standby mode.
2 Press uito select “FP LOCK zOff”. (z The currently set mode.)
3 Press ENTER to enter the setting. The Panel lock function is canceled.
Even when the Panel lock function is set, you can operate the unit using the remote control unit.
Remote lock function
•When not connecting an IR receiver, disable the Remote lock function. When the function is enabled, you can not perform operations with the remote control unit.
•By default, this function is disabled.
BACK ui ENTER
XON/STANDBY
version Basic
version Advanced
1 When the main unit is in standby mode, press X ON/STANDBY while holding down BACK and ENTER on the main unit.
2 Press uito select “RC LOCK On”.
3 Press ENTER to enter the setting.
The infrared light receiving function is disabled.
nnEnabling the remote sensor function1 When the main unit is in standby mode, press X ON/STANDBY while holding down BACK and ENTER on the main unit.
2 Press uito select “RC LOCK zOff”. (z The currently set mode.)
3 Press ENTER to enter the setting.
The infrared light receiving function on the main unit is enabled.
DVD | 98 |
Information