Playback
1
2 Press ON/STANDBY X to turn on the ZONE2 or ZONE3 power.
•Also press input source select button when in standby mode, the power turns on.
•When ON/STANDBY X is pressed, ZONE2 or ZONE3 turns off.
•Power in ZONE2 or ZONE3 can be turned on or off by pressing ZONE2 ON/OFF or ZONE3 ON/OFF on the main unit.
3 Press the input source select button to select the input source to be played.
The audio signal of the selected source is output to ZONE2 or ZONE3.
Input source 
select buttons
Use VOLUME df to adjust the volume.
GAdjustable rangeH | 0 – 40 | – 98 |
(When the “Scale” (vpage | 112) setting is “0 – 98”) | |
GAdjustable rangeH | – – – | |
(When the “Scale” (vpage | 112) setting is | |
•At time of purchase, “Volume Limit” (vpage 135) is set to “70
Turn VOLUME after pressing ZONE SELECT on the main unit to adjust the sound volume.
Turning off the sound temporarilyPress MUTE :.
The sound is reduced to the level set at “Mute Level” (vpage 135) in the menu.
•To cancel, either adjust the volume or press MUTE : again.
•The setting can also be cancelled by adjusting the volume or turning off the ZONE2 or ZONE3 power.
Sleep timer function
•This is convenient for viewing and listening while going to sleep in ZONE2 or ZONE3.
•The sleep timer function can be set by zone.
1 Press ZONE SELECT to switch “ZONE2” or “ZONE3”.
2 Press SLEEP and display the time you want to set.
•If SLLEP on the main unit is pressed,
the same function as with the remote control unit can be obtained.
•The time switches as shown below each time SLEEP is pressed.
version Basic
version Advanced
Information
When power for both MAIN ZONE and ZONE2 is set to ON, power of the MAIN ZONE only can be turned off. In Step 1, press ZONE SELECT to select “MAIN” and then press ON/STANDBY X.
You can adjust the tone and volume for ZONE2 or ZONE3 in “ZONE2 Setup” or “ZONE3 Setup” (vpage 135) in the menu.
Off 
10 min 
20 
30 
40 
50
120 
110 
100 
90 
80 
70 
60 
DVD
To confirm the countdown time before putting the unit to sleep
Press SLEEP.
“Z2 Sleep : zmin” or “Z3 Sleep : zmin” appears on the display. zz Countdown time
To cancel the sleep timer
Press SLEEP to set “Off”.
The sleep timer is also cancelled when this unit is set to the standby mode or the ZONE2 or ZONE3 power is turned off.
NOTE
The sleep timer function cannot turn off the power of devices connected to this unit. To turn off the power of those connected devices, set up sleep timers on the connected devices themselves.
102