Setting items | Setting details |
|
|
Levels | Test Tone Start : Output test tone. |
Set the volume of the test | • Front L / F. Height L / Center / F. Height R / Front R / F. Wide R / |
tone to be the same when it | Surround R / Surr. Back Rz / Surr. Back Lz / Surround L / |
is output from each speaker. | F. Wide L / Subwoofer : Select speaker to output test tone. |
| zz When the “Speaker Config.” – “Surr. Back” setting (vpage 128) is |
| set to “1spkr”, “Surr. Back” is displayed. |
| • |
| When “Levels” is adjusted, the adjusted values are set for all the sound |
| modes. |
| NOTE |
| • Speakers set to “None” in the “Speaker Config.” (vpage 127) |
| settings are not displayed. |
| • When a headphones jack is inserted in the PHONES jack of this unit, the |
| “Levels” is not displayed. |
Set Defaults : The “Levels” settings are returned to the default settings.
•Yes : Reset to the defaults.
•No : Do not reset to the defaults.
When you select “Set Defaults” and press ENTER, the “Reset to the default values?”
prompt is displayed. Select either “Yes” or “No”, and press ENTER.
Speakers
Setting items | Setting details |
|
|
Crossovers | Crossover : Set the crossover frequency. |
Set the maximum frequency • 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz /
of the bass signal output | 250Hz / Individual : Set the crossover frequency for all speakers. See | |
from each channel to | the speaker manual for information concerning speaker crossover | |
the subwoofer. Set the | frequency. | |
Crossover Frequency to | The following settings can be set when the “Crossover” setting is set to | |
suit the bass reproduction | ||
“Individual”. | ||
capability of the speaker | ||
• Front / Center / Surround / Surr. Back / Front Height : Select speaker | ||
being used. | ||
for setting of crossover frequency. | ||
| ||
| • 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / | |
| 250Hz : Set the crossover frequency. | |
| • “Crossovers” can be set when the “Bass” – “Subwoofer Mode” | |
| (vpage 128) setting is “LFE+Main”, or when you have a speaker that | |
| is set to “Small”. | |
| • Always set the crossover frequency to “80Hz”. When using small | |
| speakers, however, we recommend setting the crossover frequency to | |
| a higher frequency. | |
| • For speakers set to “Small”, sound below the crossover frequency | |
| is cut from the sound output. The cut bass sound is output from the | |
| subwoofer or front speakers. | |
| • The speakers that can be set when “Individual” is selected differ | |
| depending on to the “Subwoofer Mode” setting (vpage 128). | |
| • When “LFE” is selected, speakers set to “Small” at “Speaker Config.” | |
| can be set. If the speakers are set to “Large”, “Full Band” is displayed | |
| and the setting cannot be made. | |
| • If set to “LFE+Main”, this setting can be made regardless of the | |
| speaker size. |
version Basic
version Advanced
Information
DVD | 129 |