Specifying the zone used with the main remote control unit
When the ZONE SELECT button is pressed, only the set zone can be operated with the remote control unit.
• The factory setting is “M23”.
1 Press and hold ZONE SELECT
and SET for at least 3 seconds.
2 Use uito set the zone to be used and press ENTER.
“SET” flashes four times on the remote control unit and the normal operation mode is restored.

Setting the back light

Press the Light button on the side of the remote control, and the buttons on the remote control light for 2 seconds. If the Light button is pressed while the buttons are lit, the buttons remain lit for another 2 seconds.

•Backlight is set on in the factory settings.

Disabling the backlight

Press and hold both SET and Light

button until indicator flashes twice.

Light button

Turning the backlight on

Press and hold both SET and Light

button until indicator flashes twice.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Remote control

Zone to be used

 

 

 

 

unit display

 

 

 

 

 

 

 

 

M

MAIN ZONE only

 

 

 

 

M2

MAIN ZONE /

 

 

 

 

ZONE2

 

 

 

 

 

 

 

 

MAIN ZONE /

 

 

 

 

M23

ZONE2 /

 

 

 

ZONE3

 

 

 

 

 

 

 

version Basic

version Advanced

Information

Light button

DVD

148