Change the display title of each zone to one you prefer.
Setting details
MAIN ZONE / ZONE2 / ZONE3
•Up to 10 characters can be input.
•For character input, see page 107.
Trigger Out 1 / Trigger Out 2Selects when to activate trigger out.
For details about how to connect the DC OUT jacks, see “DC OUT jacks” (vpage 91).
Setting details
nn When setting for zone (MAIN ZONE / ZONE2 / ZONE3)
Trigger out is activated through linkage to the power of the zone set to “On”.
nn When setting for input source
Activate trigger out when the input source set to “On” is selected.
Active for the zone set to “On” with “When setting for zone”.
nn When setting for HDMI monitor
Activate trigger out when the HDMI monitor set to “On” is selected.
Activate trigger out when the HDMI monitor set to “On” is selected. Active when the “MAIN ZONE” set to “On” with “When setting for zone” is selected, and when the input source set to “On” with “When setting for input source” is selected.
•On : Activate trigger on this mode.
•– –
| General |
| Auto Standby | Default settings are underlined. |
When you do not perform any operation on this unit with no audio or video input for a specified time, this unit automatically enters the standby mode. Before it enters the standby mode, “Auto Standby” is displayed on the display of this unit and the menu screen.
Setting details
30min : The unit goes into standby after 30 minutes.
60min : The unit goes into standby after 60 minutes.
Off : The unit does not go into standby automatically.
| Front Display | Default settings are underlined. |
Makes settings related to the display on this unit.
Setting items |
|
|
| Setting details | ||||||
Display | On : Display is always on. |
|
|
|
|
|
|
| ||
| Auto OFF : Display is off except when showing the status display. | |||||||||
| Off : Display is always off. |
|
|
|
|
|
|
| ||
| This can also be set by pressing DISPLAY on the main unit. | |||||||||
| Each time DISPLAY is pressed, the setting is changed as shown | |||||||||
| below. |
|
|
|
|
|
|
| ||
|
|
| On |
|
|
| Auto Off |
|
| |
|
|
|
|
|
| Off |
|
| ||
| NOTE |
|
|
|
|
| ||||
|
|
|
|
|
|
|
| |||
| When “Display” is set to “Off”, the display turns off and appears as if | |||||||||
| there is no electricity. |
|
|
|
|
|
|
| ||
Channel Indicator | Output : Uses the output signal display for the channel indication on the | |||||||||
Sets whether to use the | display. |
|
|
|
|
|
|
| ||
input signal display or | Input : Uses the input signal display for the channel indication on the | |||||||||
output signal display for the | display. |
|
|
|
|
|
|
| ||
channel indication on the |
|
|
|
|
|
|
|
|
|
|
display. |
|
|
|
|
|
|
|
|
|
|
version Basic
version Advanced
Information
DVD | 136 |