Check the registered preset code

1 Press and hold the input source select buttons for the appliance to control, and press SET until indicator blinks twice.

The back light flashes.

2 Press INFO.

The indicator blinks twice, after which the set code is shown for 3 seconds in the remote control display.

DVD

Registering preset codes

nnRemote control operation modes

By default, the input source select buttons on the remote control perform only the input source select operation. To operate an external device with this remote control, set the preset code in “List of preset codes” (vpage 177) for the device you want to register to each input source select button.

For how to set preset codes to buttons, see “Registering preset codes” (vpage 140).

If you register preset codes on this remote control, the input source select buttons on the remote control can perform the following two functions.

qThe function to switch input sources on this unit (AVR operation mode)

w The function to make this remote control switch to the mode in which you can operate the device registered to the button (External device operation mode)

nnHow to switch operation modes

 

 

 

 

Press the input source

 

 

 

 

 

 

select button.

 

 

 

 

 

 

 

 

q AVR operation

 

 

 

 

 

w External device

modez1

 

 

 

 

 

operation modez2

 

 

 

 

Press AVR.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Inputsource select buttons

z1 The mode in which you can operate this unit.

z2 If you press one of these buttons , the input source on this unit changes and the remote control switches to the mode in which you can operate the external device registered to that button.

141

version Basic

version Advanced

Information