Setting items | Setting details |
|
|
Video Output | Auto (Dual) : The presence of a TV connected to the HDMI MONITOR |
Make settings for HDMI | 1 or HDMI MONITOR 2 connector is detected automatically, and that TV |
monitor output. | connection is used. |
| Monitor 1 : A TV connected to the HDMI MONITOR 1 connector is always |
| used. Video is not output from the TV connected to the HDMI MONITOR |
| 2 connector. |
| Monitor 2 : A TV connected to the HDMI MONITOR 2 connector is always |
| used. Video is not output from the TV connected to the HDMI MONITOR |
| 1 connector. |
•If both the HDMI MONITOR 1 and HDMI MONITOR 2 connectors are connected and “Resolution” (vpage 118) is set to “Auto”, the signals are output with a resolution compatible with both TV.
•With “Resolution” (vpage 118) not set to “Auto”, check whether the TV you are using is compatible with the resolution under “Video” – “Monitor” (vpage 137).
•This can also be set by pressing HDMI OUT on the main unit.
Each time HDMI OUT is pressed, the setting is changed as shown below.
Auto (Dual) 
Monitor 1
Monitor 2 
| NOTE |
| Depending on the monitor you have connected, the display may not |
| be correct when you set to “Auto (Dual)”. In such a case, set to either |
| “Monitor 1” or “Monitor 2”. |
HDMI Control | On : Use HDMI control function. |
You can link operations with Off : Do not use HDMI control function.
devices connected to HDMI |
| |
and compatible with HDMI | • When a device that is not compatible with the HDMI control function is | |
Control. | ||
connected, set “HDMI Control” to “Off”. | ||
|
•Please consult the operating instructions for each connected device to check the settings.
•Refer to “HDMI control function” (vpage 92) for more information about the HDMI control function.
NOTE
•When “HDMI Control” is set to “On”, it consumes more standby power. If you are not using this unit for an extended period, it is recommended that you unplug the power cord from the power outlet.
•The HDMI control function controls operations of a TV that is compatible with the HDMI control function. Make sure that the TV and HDMI are connected when you perform HDMI control.
•If the “HDMI Control” settings have been changed, always reset the power to connected devices after the change.
| Video |
|
|
Setting items | Setting details |
|
|
Standby Source | Last : Enters standby with the previously used input source. |
Sets the HDMI input source | CBL/SAT / DVD / |
to put into standby when | CD : Enters standby with each of the input sources assigned to each input |
the power is on. | connector. |
| “Standby Source” can be set when “HDMI Control” is set to “On”. |
Control Monitor | Monitor 1 : Output from the HDMI MONITOR 1 connector. |
Set the HDMI MONITOR | Monitor 2 : Output from the HDMI MONITOR 2 connector. |
terminal to output the HDMI |
|
control signal. | • “Control Monitor” can be set when “HDMI Control” is set to “On”. |
| |
| • ARC function works only with the terminal selected by “Control |
| Monitor”. |
Power Off Control | All : If power to a connected TV is turned off independently of the input |
Links the power standby of | source, power to this unit is automatically set to standby. |
this unit to external devices. | Video : If power to a connected TV is turned off when the input source is |
| CBL/SAT / DVD / |
| power to this unit is automatically set to standby. |
| Off : This unit does not link with power to a TV. |
“Power Off Control” can be set when “HDMI Control” is set to “On”.
version Basic
version Advanced
Information
DVD | 117 |