Playback (Advanced operation)

Setup (vpage 29)

Playback (Basic operation) (vpage 36)

Selecting a listening mode (Sound Mode) (vpage 77)

Connections (Advanced connection) (vpage 90)

nn HDMI control function (vpage 92) nn Sleep timer function (vpage 94) nn Web control function (vpage 95)

nn Dual backup memory function (vpage 97) nn Panel lock function (vpage 97)

nn Remote lock function (vpage 98)

nn Switches light illumination on/off (vpage 99) nn Various memory functions (vpage 99)

HDMI control function

If you connect the unit and an HDMI control function compatible TV or player with an HDMI cable and then enable the HDMI control function setting on each device, the devices will be able to control each other.

nnOperations possible by HDMI control

•This unit power off can be linked to the TV power off step.

•You can switch audio output devices with a TV operation. When you set “Output audio from amp” in the TV audio output setup operation, you can switch the amp power on.

•You can adjust this unit volume in the TV volume adjustment operation.

•You can switch this unit input sources through linkage to TV input switching.

•When playing the player, this unit input source switches to the source for that player.

•If you switch the input source of the unit to “TV AUDIO”, you can play TV audio with this unit (vpage 9 “About ARC (Audio Return Channel) function”).

•When “HDMI Control” (vpage 117) in the menu is set to “On”, signals input to the HDMI input connector are output to the television or other device connected to the HDMI output connector, even if the power of this unit is in standby (pass- through function).

•To use this unit to play the audio of a TV that does not support the ARC function, connect the TV with an optical-digital or analog connection (vpage 9).

•To use the pass-through function, connect an HDMI connection device that is compatible with HDMI control.

nnSetting procedure

1 Set the HDMI output connector corresponding with the HDMI control function.

Set “HDMI Control” (vpage 117) to “On”.

2 Turn the power on for all the devices connected by HDMI cable.

3 Set the HDMI control function for all devices connected by HDMI cable.

•Please consult the operating instructions for the connected devices to check the settings.

•Carry out steps 2 and 3 should any of the devices be unplugged.

4 Switch the television input to the HDMI input connected to this unit.

5 Switch this unit input to the HDMI input source and check if the picture from the player is ok.

6 When you turn the TV’s power to standby, check that the power of this unit also goes to standby.

v See overleaf

version Basic

version Advanced

Information

DVD

92