Symptom

Cause/Solution

Page

When the HDMI

• Make sure that the power is on for ZONE2.

102

ZONE2 function is

• Check the input source for ZONE2.

102

used, no video or

• Check the output settings (resolution/audio format) for the input

–

audio is output to TV

device

 

in ZONE2.

 

 

When playing back

• “HDMI Control” in the menu is set to “On”. When using the

92, 117

the input device just

HDMI ZONE2 function, set “HDMI Control” in the menu to “Off”.

 

to use the HDMI

 

 

ZONE2 function, the

 

 

TV used for MAIN

 

 

ZONE is turned on.

 

 

GVideoH

 

 

Symptom

Cause/Solution

Page

No picture appears.

• Check the connection between the video output terminal of this

10, 14

 

unit and the input terminal of the TV.

 

 

• Match the input settings to the input terminal of the TV connected

–

 

to this unit.

 

GAudioH

Symptom

Cause/Solution

Page

Audio is not output.

• Check the connections for all devices.

10,11,14,15,

 

 

 

16,17,18,19,

 

 

 

20,21,22,23,

 

 

 

24,25,26,27

 

• Check the speaker connections and configurations.

26, 86, 87

 

• Check the connections for PRE OUT terminals.

26, 86, 87

 

• Check whether the audio device power is turned on.

–

 

• Adjust the master volume.

37, 102

 

• Cancel the mute mode.

37, 102

 

• Check the connection with the playback device and select the

36, 102

 

proper input source.

 

 

 

• Match the input mode and the terminal assigned to be the digital

124

 

 

input terminal.

 

 

 

• Disconnect the headphones. No sound is output from the PRE

150

 

 

OUT terminals when headphones are connected.

 

 

The volume does not

• The maximum volume is set too low. Set the maximum volume

112

 

increase.

using “Limit” on the menu.

 

 

 

• Power for external devices connected to the output connectors

–

 

of the unit may not be turned on. Check the power of connected

 

 

 

external devices.

 

 

No sound is

• Check if the surround speakers are connected to the SURROUND

–

produced from

terminals of Power Amplifire.

 

 

surround speaker.

 

 

 

 

No sound is

• Set “Speaker Config.” – “Surr. Back” on the menu to something

128

 

produced from

other than “None”.

 

 

surround back

• Set the sound mode to something other than “STEREO” and

77

 

speaker.

“VIRTUAL”.

 

 

No sound is

• Set “Speaker Config.” – “Front Height” on the menu to something

128

 

produced from front

other than “None”.

 

 

height speaker.

 

 

 

 

No sound is

• Set “Speaker Config.” – “Front Wide” on the menu to something

128

 

produced from front

other than “None”.

 

 

wide speaker.

 

 

 

 

 

 

v See overleaf

 

version Basic

version Advanced

Information

DVD

170