Mitel 5340, 5320, 5330 manual Using the Configuration Assistant, Changing Your Station Passcode

Call Features

Using the Configuration Assistant

If Configuration Assistant is enabled for your system, you can access this voice guided configuration portal that provides easy-to-use, remote access to the following phone configuration options:

•Dynamic Extension Express (see page 64)

•DND (see page 62)

•Manual Call Forwarding (see page 62)

•Meet-Me Conferencing (see page 63)

NOTE

You need a Configuration Assistant extension number to use this feature. Contact your system administrator for more information.

Changing Your Station Passcode

Before using the Configuration Assistant, Mitel recommends that you change your default station (phone) passcode to something more secure.

To change your station passcode:

1.Dial 392. ENTER PASSCODE appears.

2.Enter your current passcode (the default passcode is your extension number), followed by #. CHANGE PASSCODE TO appears.

3.Enter the new passcode followed by #. VERIFY PASSCODE appears.

4.Enter the new passcode again followed by #. DATABASE UPDATED appears.

To change the passcode from another phone, see “Changing Your Station Passcode” on page 66.

Mitel® 5320/5330/5340 IP Phone User Guide – Release 5.0, April 2013 Page 59