CDM-570/570L Satellite Modem with Optional IP Module Revision 4
IP Module - CLI and Telnet Operation MN/CDM570L.IOM
Menu Options/Fields Entry Description
3xDES Configuration D The 3xDES Configuration Page allows the user to
determine if 3xDES encryption is enable d on a device
and if so, the 3xDES keys that are used to decrypt
traffic. The keys specified for the transmit function are
completely independent for the 3xDES keys spe cifie d
for the receiver function.
SMTP Configuration M The SMTP configuration page allows the user to
specify appropriate settings for SMTP email server.
SNMP Configuration N The SNMP configuration page allows the user to
specify management parameters for SNMP.
Working Mode C Used to set the Working Mode to:
Router – Small Network
Router – Large Network
Router – Point to Point
Router – Vipersat
easyConnect™
See Chapter 15 for additional inform ation.
easyConnect™ Multicast
Option E When unit is running in easyConnect™ mode, multicast
is only forwarded across link if both units have this
feature enabled.
Header comp refresh rate
(in pkts) for UDP/RTP1 H This setting allows for the adjustment of how often to
send a full header of this type of traffic when Header
Compression is enabl ed.
Header comp refresh rate
(in pkts) for UDP U This setting allows for the adjustment of how often to
send a full header of this type of traffic when Header
Compression is enabl ed.
Header comp refresh rate
(in pkts) for all others O This setting allows for the adjustment of how often to
send a full header of this type of traffic when Header
Compression is enabl ed.
Payload comp refresh rate
(in pkts) Q This setting allows for the adjustment of how often to
send a full payload when Payload Compression is
enabled.
Telnet Timeout T The Telnet timeout determines how m any minutes (1-
60) of Telnet inactivity before the Telnet session is
automatically terminated.
Save Parameters S This option allows a user to save the current
configuration to permanent storage. This configuration
will be restored on each successive power cycle.
Exit X This option allows a user to exit the current menu and
return to its parent menu.
17–6