Page 15 of 54 MN/CDM570L.AA4
37
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Number of
route entries
N/A RTN=3 bytes,
numerical
Query Only.
Returns the number of route entries in the route table.
Note: This command should be issued whenever a new route is
added/deleted.
RTN =
RTN!
RTN? RTN = xxxx
(see description of
arguments)
Delete route
entry
RTD= RTD=4 bytes,
numerical
Command Only.
Deletes the route entry at the specified index number, if configured.
Returns RTD!, if there is no route at the index.
RTD =
RTD! RTD = xx.xx
(see description of
arguments)
Route Table
Get
N/A N/A Query only.
Get the whole Routing Table of the modem. Each route entry is
separated by ‘\r’ [chr(13)]
The route table will be displayed only if system’s working mode is
“Router –Small, Router-Large, Router-PtP. If the system is in
EasyConnect mode, it may return RCG!
RCG! RCG? RCG=
xxxxxxxxxxxxxx
xxxxxxxxxxxxxx