Page 14 of 54 MN/CDM570L.AA4
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Route Table
(Continued)
When called using an existing index, the command is treated as a
“modify”. Only new routes can be added at the END of the list:
Example:
RTN?
RTN=3
<1/rte[3]=
rt3|239.111.102.222.32|0|192.168.001.022|00AB|0|0|1|5|3
Sat Directed Route:
>0001/RTE[1]=rt1|011.012.013.014/32|1|***.***.***.***|1111|0|0|
0|0|0
Eth Directed Route:
>0001/RTE[4]=rt4|012.013.014.015/32|0|192.168.001.111|****|0|0|
0|0|0
Note: To be able to set/get the route entries, the system should be in
the routing. It may retur RTE!, if system is in EasyConnect mode.