Multi-Tech Systems BA-Series manual Configure Data

Chapter 4 - Command Mode

CONFIGURE DATA		&E14	Data Compression Disabled
COMPRESSION		&E15	Data Compression Enabled
CONFIGURE SPEED		$BA0	Speed Conversion On
CONVERSION		$BA1	Speed Conversion Off
		$MB	Set modem speed (e.g.,$MB14400)
		$SB	Set serial port speed (e.g.,$SB57600)
EXECUTE		$H	Help
IMMEDIATE		I	Product Code Inquiry
ACTION		I 9	Windows 95 Autodetect Inquiry (2834 Series only)
COMMANDS		L5	List Current Operating Parameters
		L6	List S-Register Values
		L7	List additional Configuration Parameters
		L8	List On-Line Diagnostics
		H	Off Hook
	+++AT<CR>		Escape Sequence: Entering Command Mode while On-Line
		%E	Escape Sequence Options...Entering Command Mode while On-Line
		A	Force Answer Mode
		O	Exit Command Mode/Go Back On-Line
EXECUTE		%DF	Format Line Probe Display (Graph or Table Format)
LINE		%DP	Enable/Disable Reading Line Probe From DSP during handshake
PROBE		L9	Display of Signal Strength Information
COMMANDS		L10	Display Signal to Noise Ratio (SNR)
(2834 Series only)		L11	Display of Noise Information
		&RP Initiates Retrain to Read Line Probe Parameters
READ AND		Sr?	Read Current S-Register Value
ASSIGN		Sr=	Assign S-Register Value
S-REGISTER
VALUES
REMOTE		#CBN	Passwords for Callback Phone Numbers
CONFIGURATION		#DB	Callback Security Enable/Disable
& CALLBACK		#I	Change LOGIN Password
SECURITY	#RCBNxx		Erase Password Linked with Memory Location xx
		#S	Change SETUP Password
TEST MODEM		U	Self-Test Modem (Chapter 8)
		&T	Enable/Disable Digital Loopback Signal

25