MultiModemBA User Guide
Command | Values | Description |
DsNd | s = phone # | Store telephone number. To store, phone d = 0 thru |
|
| 9 number ”s“ is entered and followed by N and then |
|
| Directory Number “d.” |
&Dn | n = 0 thru 3 | &D0 DTR is ignored |
|
| &D1 means modem returns to command mode. |
|
| * &D2 lets modem react to DTR normally. |
|
| &D3 causes modem to reset to modem default |
|
| parameters. |
%DFn | n = 0 or 1 | * %DF0 Line Probe Data in Graph Format. |
|
| %DF1 Line Probe Data in Table Format. |
%DPn | n = 0 or 1 | * %DP0 do not read Line Probe Information from DSP |
|
| during handshaking. |
|
| %DP1 read Line Probe Information from DSP during |
|
| handshaking. |
$Dn | n = 0 or 1 | * $D0 disables DTR Dialing. |
|
| $D1 enables DTR Dialing. |
En | n = 0 or 1 | E0 means do not echo Command Mode Character. |
|
| * E1 means do echo Command Mode characters. |
&En | n = 0 thru 15 | &E0 means no error correction. |
|
| * &E1 means V.42 |
|
| &E2 means V.42 Reliable Mode. |
|
| &E3 means no |
|
| * &E4 means CTS |
|
| &E5 means Xon/Xoff |
|
| * &E6 means Xon/Xoff not passed through. |
|
| &E7 means Xon/Xoff passed through. |
|
| * &E8 means Enq/Ack pacing off. |
|
| &E9 means Enq/Ack pacing on. |
|
| * &E10 means Normal Mode flow control off. |
|
| &E11 means Normal Mode flow control on. |
|
| &E12 means Pacing off. |
|
| * &E13 means Pacing on. |
|
| &E14 means data compression disabled. |
|
| * &E15 means data compression enabled. |
$EBn | n = 0 or 1 | * $EB0 enables 10 bit mode. |
|
| $EB1 enables 11 bit mode. |
%En | n=0 thru 5 | % E0 = Modem Won’t Escape. |
|
| * % E1 = +++ Method (default setting). |
|
| % E2 = Break Method. |
|
| % E3 = Either +++ or Break Method. |
|
| % E4 = No "OK" Response to +++ |
|
| % E5 = "OK" Response to +++ |
#Fn | n = 0 thru 2 | #F0 means no fallback when |
|
| #F1 means fallbackwhen |
|
| 2400 bps). |
|
| * #F2 means fallback to 4800 bps/fall forward if line |
|
| improves (increments of 2400 bps). |
88
