Multi-Tech Systems BA-Series 7.4 Recording Option Configurations

72

MultiModemBA User Guide

7.4 Recording Option Configurations

This section lets you record any changes you may have made to the DIP-Switch settings. Circle the

appropriate setting and record the effect for future reference.

DIP-Switches

Switch Function Position Effect

#1 Force DTR/DTR from Interface* UP* DTR Dependent on Interface

DOWN DTR Forced On at All Times

#2 Flow Control &E4*/&E5 UP* Hardware Flow Control

(Async/Dial-Up/Leased Line) DOWN XON /OFF Flow Control

#2 SDLC*/BSC (Sync) UP* SDLC Mode On

DOWN BSC Mode On

#3 Result Codes Enable*/Disable UP Command Mode Response Off

(Async/Dial-up) DOWN* Command Mode Response ON

#3 DbM Transmit (-9db/0dB)*/(-15db/-10dB) UP -15 dB Transmission (leased line)

(Async/Sync/Lease-Line) DOWN* -9 dB Transmission (leased line)

#4 UUCP Enable/Disable* UP* UUCP Spoofing Off

(Async/Dial-Up/Leased Line) DOWN UUCP Spoofing On

#4 AS/400 Enable/Disable* UP* AS/400 Mode Off

(Sync/Dial-Up/Leased line) DOWN AS/400 Mode On

#5 Auto-Answer Enable*/Disable UP* Automatic Answer On

(Async/Sync/Dial-Up) DOWN Automatic Answer Off

#5 Answer*/Originate DOWN Answer Mode On

(Async/Sync/Leased Line) UP* Originate Mode On

#6 Max-Thru Enable*/Disable UP* Max Throughput On

(Async/Dial-Up/Leased) DOWN Max Throughput Off

#6 Slave Clock Enable/Disable* UP* Slave Clocking Off

(Sync/Dial-Up/Leased) DOWN Slave Clocking On

#7 RTS/Normal/Forced* UP RTS Dependent on Interface

(Sync/Async/Dial/Leased) DOWN* RTS Forced On at All Times

#8 Command Mode Enabled* UP Command Mode Off

(Sync/Async/Dial/Leased) DOWN* Command Mode On

#9 Local/Remote* LoopBack UP Local Digital Loopback On

(Async/Sync/Dial/Leased) DOWN* Remote Digital Loopback On

#10 Dial-Up*/Leased-Line UP* Dial-Up Operation

DOWN Leased-Line Operation

#11

"AT"

/

"Multi-Tech"

Result Codes* UP AT Responses

(Asynchronous) DOWN* Multi-Tech Responses

#11 Internal Clocking*/External Clocking UP External Clocking Selected

(Synchronous) DOWN* Internal Clocking Selected

#12 Sync/Async Mode* UP Synchronous Mode On

DOWN* Asynchronous Mode On

* Factory Default Setting

Contents

Main User Guide Contents Index.................................................................................106 Page 1.1 Introduction 1.2 How To Use This Manual Chapter 1 - Introduction and Description Chapter 2 - Installation and Connection Chapter 3 - Software Configuration and Modem Basics 1.3 Modem Features 1.3.1 2834 Series Features Enhanced V.34 Enhanced 1.4 Fax Features 1.5 Technical Specifications terbo 1.6 Power 1.7 Modem LED Indicators 1.8 Controls on PC Board Page 2.1 What is in Your Modem Package? 2.2 Installation 2.2.1 Safety Warnings 2.2.2 Installation Procedure * indicates Factory Default setting 2.3 Installing Data Communications Software Page 3.1 Introduction 3.2 Configuring Your Software LINE DATA BUSY, 3.4.1 Changing Default Parameters 3.4.2 Other Parameters minimum not RING, NO CARRIER, BUSY, 3.5.2 Terminal Emulation terminal emulation 3.5.3 File Transfer Protocols Page 4.1 Introduction 4.1.1 AT Command Editing 4.1.2 Functional Modes 4.2 Summary of AT Commands Page Page 4.3 Result Codes 4.4 Dialing Commands 4.4.1 Dialing Action Commands Dial Command D Continuous Redial (not used in BAI) A: or : Dialing a Stored Number N DTR Dialing $D 4.4.2 Dial Modifier Commands Pulse or Tone Dial P T Set Pulse Dial Ratios &P Automatic Pauses in Dialing , Long Space Disconnect Y Wait for New Dial-Tone W Return to Command Mode After Dial Command Execution ; ATDT 1028806127853500 $ Quiet Answer @ 4.4.3 Phone Number Memory Commands Storing Phone Numbers D...N Number Linking NN 4.4.4 Configuration and Default Storage Commands Store Configuration & S-Register Parameters in Non-Volatile Memory &W Loading Factory Defaults &F Modem Reset Z Unix UUCP Spoofing $SP Async/Sync Mode Switching &M Synchronous Transmit Clock Select &X 4.4.5 Command Response (Result Code) Commands Echo Command Mode Characters E Result Codes Enable/Disable and No Response Answer Q Result Codes ("Multi-Tech" or "Standard AT") &Q Result Codes (Verbose/Terse) V 4.4.6 Phone Line Conditioning Commands Guard Tones (Not Used in BAI Models) &G Bell/V.21 Tone B Phone Line Monitoring Speaker M Enable or Disable Recognition of Remote Digital Loop Signal &T Enable/Disable Trelis Coded Modulation #T Fallback Modes When On-Line #F 4.4.7 RS-232C Interface Control Commands Carrier Detect Control &C Data Terminal Ready Control &D CTS Control &R Data Set Ready Control &S CTS/RTS Interaction Control &RF DSR/CD Interaction Control &SF 4.4.8 Error Correction Commands Normal Mode &E0 Auto-Reliable Mode &E1 Reliable Mode &E2 V.42 Mode Select #L Auto-Reliable Buffering $A Enable/Disable Auto Reliable Fallback Character $F Retransmit Count $R V.42 Error Correction/300bps $E 4.4.9 Flow Control Commands Hardware Flow Control &E4 &E3 Respond, No Pass-Through Respond, Pass-Through Xoff Send Xon/Xoff Characters #X Hewlett-Packard ENQ/ACK Pacing &E9 AT&BS1 AT&BS0 speed 4.4.10 Compression, Error Correction, Flow Control, Pass- Through and Pacing Commands 4.4.11 Speed Conversion Commands baud rate AT$MBn transmission $MB Serial Port Baud Rate $SB $BA AT$SBn ATZ 4.4.12 Immediate Action Commands Help Screens $H Inquiry for Product Code I Windows 95 Autodetect Inquiry I9 Listing Current Operating Parameters L5 L7 Off Hook H Escape Sequences- Entering Command Mode While Still On-Line +++AT<CR> BREAK AT<CR> Escape Sequence Options - Entering Command Mode While On-Line %E Force Answer Mode A 4.4.13 Line Probe Commands Page 5.1 Introduction = + read ATS8? Page S9 Carrier Detect Response Time S10 Carrier Loss Disconnect Delay Time %%% % S11 Tone Dialing: Tone Spacing and Duration Page S26 Failed Password Attempts 003 #DB1 ATS26? S29 Local Inactivity Timer 5.2 Reading and Assigning S-Register Values 5.2.1 Examples of Assigning Values 5.2.2 Examples of Reading Values 5.3 AT Command and S-Register Summary Page 6.1 Introduction 6.2 Callback Feature Description 6.3 Remote Configuration Description 6.3.1 Initial Setup Procedures for Callback and Remote Configuration. Page Page AT#Ixxxxxxxxxx<CR> AT#Syyyyyyyyyy<CR> Password> DB> 6.3.2 Remote Configuration Procedures 1. - DATA Mode 2. - COMMAND Mode 6.4 Remote Configuration and Callback Security AT Commands Callback Security Enable/Disable #DB Change LOGIN Password #I Change SETUP Password #S "SMODEMSETUP" 6.5 Remote Configuration/Callback Security S-Registers Remote Configuration Character (S13) Callback Time Delay (S15) Callback Attempts (S16) Failed Password Attempts (S26) Local Inactivity Timer (S29) #DB1 Page 7.1 Introduction 7.2 DIP-Switch Option Settings &E4 &E5 &E4 Page Page Page Page 7.3 Speaker Volume Control 7.4 Recording Option Configurations DIP-Switches "Multi-Tech" "AT" DIP Switches #13-14 $MBn DIP Switches #15-16 Page 8.1 Introduction BBS 8.2 Multi-Tech Systems, Inc. Warranty & Repairs Policies Warranty Repair Procedures for U.S. and Canadian Customers 8.3 Online Warranty Registration http:// www.multitech.com/register/ 8.4 Replacement Parts 8.5 Technical Support 8.6 Internet Sites Page Appendix A -- Upgrading Your Modems Firmware firmware Upgrade Overview Step 1: Identify the Modem Firmware Step 2: Identify the Current Firmware Version Step 3: Download the Upgrade File Step 4: Extract the Upgrade Files Step 5: Clear Your Stored Parameters Step 6: Upgrade the Modems Firmware ERROR: No valid devices detected Programming Complete Step 7: Restore Your Parameters Appendix B - Troubleshooting None of the LEDs Light When the Modem Is On The Modem Does Not Respond to Commands Page The Modem Dials But Cannot Make a Connection 9 NO ANSWER 9 The Modem Disconnects While On-line The Modem Cannot Connect When Answering File Transfer Is Slower Than It Should Be I Am Losing Data I Am Getting Garbage Characters on the Monitor My Fax and Communications Software Wont Run at the Same Time Apendix C - AT Command Summary D N #F %E $EB Page Page Page Page Callback Security/Remote Configuration Command Summary Password Command Summary V.25bis Commands Appendix D - V.25bis Operation Delayed and Forbidden Numbers V.25bis Operation ATX1 $VD1 V.25bis Set-Up and Initialization V.25bis Mode AT Commands V.25bis Responses (Result Codes) V.25bis AT Commands Enable/Disable V.25bis Mode ($V) Command Change Serial Baud Rate (CSP) Command Dial Phone Number Provided (CRN) Command Listing Delayed Phone Numbers (RLD) Command Listing Forbidden Phone Number (RLF) Command Disregard or Connect to Incoming Calls (DIC or CIC) Command DTR Dialing ($D) Command AT$D t PAUt PAU CFINT 102 MultiModemBA User Guide Figure E-2. Two Wire Leased Line Connection Appendix E - MultiModemBA Cables These cables connect your modem to your terminal or computers serial port. 25-PIN DTE Connector 25-PIN DCE Device Figure E-1. RS232 Cable (IBM PC) Appendix F - Regulatory Information FCC Part 15 FCC Part 68 Telecom Canadian Limitations Notice International Modem Restrictions EMC, Safety, and R&TTE Directive Compliance Index A B C D F G H I L Q R S T U