RAS96 RASCard User Guide
CommPlete Communications Server72
Code Name Description
43 Detect and Initialize
Serial and Parallel PortsInitialize any serial and parallel ports (also game port).
44 Reserved
45 Detect and Initialize
Math Coprocessor Initialize math coprocessor.
46–4D Reserved
4E Manufacturing POST
Loop or Display
Messages
Reboot if Manufacturing POST Loop pin is set. Otherwise
display any messages (i.e., any non-fatal errors that were
detected during POST) and enter Setup.
4F Security Check Ask password security (optional).
50 Write CMOS Write all CMOS values back to RAM and clear screen.
51 Pre-Boot Enable Enable parity checker. Enable NMI. Enable cache before
boot.
52 Initialize Option ROMs Initialize any option ROMs present from C8000h to EFFFFh.
Note: When FSCAN option is enabled, will initialize from
C8000h to F7FFFh.
53 Initialize Time Value Initialize time value in 40h BIOS area.
60 Setup Virus Protect Set up virus protect according to Setup
61 Set Boot Speed Set system speed for boot
62 Setup NumLock Set NumLock status according to Setup
63 Boot Attempt Set low stack boot via INE19h.
B0 Spurious If interrupt occurs in protected mode.
B1 Unclaimed NMI If unmasked NMI occurs, display Press F1 to disable NMI,
F2 reboot.
E1–EF Setup Pages E1, page 1; E2, page 2; etc.
FF Boot