Multi-Tech Systems RAS96 manual Technical Specifications, Appendix B Post Messages

1 Introduction

Appendix B POST Messages

This appendix describes error messages that might be encountered during the RAS96’s power-on self-test (POST).

Appendix C POST Codes

This appendix describes codes generated by the BIOS during POST.

Appendix D Approved Memory

This appendix lists memory SIMMs that are known to work with the RAS96.

Appendix E Regulatory Agency Information

This appendix provides Regulatory Agency information pertaining to this E1device.

Technical Specifications

•Intel 430FX Triton chipset

•Supports 100 MHz, 133 MHz, 166 MHz, and 200 MHz Intel® Pentium® processors.

•PCI/ISA bus architecture for full PCI bus support.

•On-board PCI-bus SVGA video controller with 1 MB of video DRAM supports resolutions to 1024 by 768 pixels by 256 colors.

•Supports 72-pin SIMMs of 4 MB, 8 MB, 16 MB, or 32 MB to form a memory size between 8 MB and 128 MB. Memory type can be fast page or EDO, 60 ns or 70 ns, parity or non-parity.

•512K of L2 cache memory.

•One parallel port and two RS-232C serial ports with 16550 UARTs (DB-9P connector for COM1; COM2 is for E1 cards).

•1.44 MB floppy disk controller.

•IDE hard disk interface.

•2.5-inch on-board hard disk. Available disk sizes include 800 MB, 1.2 GB, 1.6 GB, and 2.1 GB.

•Keyboard and speaker interfaces.

•Real-time clock with battery backup.

•Award BIOS with custom features.

•Watchdog timer.

•E1 frame format: CRC4, FAS, and ITU Q.400-Q.490

•E1 line coding: AMI, HDB3

•E1 signal start method: R2DIGITAL

•Switches: Power switch and reset switch on front panel.

•Indicators: Front panel LEDs for monitoring network and E1 operations.

•Dimensions: 23.4 × 4.32 × 29.2 cm (9.22 × 1.70 × 11.5 in.) H × W × D.

•Weight: 1.0 kg (2.2 lb).

•Operating temperature: 0° to 40° C (32° to 104° F).

CommPlete Communications Server 3