MAINTENANCE PARTS
To avoid print quality and paper feed problems resulting from worn parts, and to maintain your machine in top working condition the following condition, the following items will need to be replaced after the specified number of pages, or when the life span of each item has expired.
ITEMS | YIELD (AVERAGE) |
|
|
Fuser unit | Approx. 100,000 pages |
|
|
DADF friction pad | Approx. 20,000 pages |
|
|
DADF | Approx. 80,000 pages |
|
|
Approx. 70,000 pages | |
FCFa, Optional tray 2) |
|
Friction pad | Approx. 70,000 pages |
FCF, Optional tray 2) |
|
a. First cassette feeder (Tray1) |
|
We highly recommend that this maintenance be performed by an authorized service provider, dealer or the retailer where you bought the machine. The warranty does not cover the replacement of the maintenance parts after their lifespan.
Checking replaceables
If you experience frequent paper jams or printing problems, check the number of pages the machine has printed or scanned. Replace the corresponding parts, if necessary.
1.Press Menu until System Setup appears on the bottom line of the display and press OK.
2.Press the left/right arrow until Maintenance appears and press OK.
3.Press the left/right arrow until Supplies Life appears and press OK.
4.Press the left/right arrow until the item you want appears and press OK.
•Supplies Info: Prints the supply information page.
•Total: Displays the total number of pages printed.
•ADF Scan: Displays the number of pages scanned using the ADF.
•Platen Scan: Displays the number of pages scanned using the scanner glass.
•Transfer Belt, Fuser, Tray1 Roller, Tray2 Roller, MP Tray Roller: Displays the number of pages printed each item.
5.If you selected to print a supply information page, press OK to confirm.
6.Press Stop/Clear to return to ready mode.
Replacing the DADF rubber pad
You will need to replace the DADF (or ADF) rubber pad when there seems to be a consistent problem with paper pickup or when its specified yield is reached.
For the ADF
1.Open the ADF cover.
2.Rotate the bushing on the right end of the ADF roller toward the ADF and remove the roller from the slot.
3.Remove the ADF rubber pad from the ADF, as shown.
4.Insert a new ADF rubber pad into place.
5.Align the left end of the ADF roller with the slot and push the right end of the roller into the right slot. Rotate the bushing on the right end of the roller toward the document input tray.
6.Close the ADF cover.
