Scanning
You can scan docoments using Image Capture program. Macintosh OS offers Image Capture program.
Scanning with USB
1Make sure that your machine and computer are turned on and properly connected to each other.
2Place a single document face down on the document glass. OR load the document(s) face up into the DADF.
3Start Applications and click Image Capture.
NOTE: If No Image Capture device connected message
appears, disconnect the USB cable and reconnect it. If the problem persists, please refer to the Image Capture’s help.
4Set the scan options on this program.
5Scan and save your scanned image.
NOTE:
•For more information about using Image Capture, please refer to the Image Capture’s help.
•If you want to scan via the DADF, use
•You can also scan using
•Scan process differ according to
•If scanning does not operate in Image Capture, update Mac OS to the latest version. Image Capture operates propery in Mac OS 10.3.9 or higher and Mac OS 10.4.7 or higher.
Scanning with network
1Make sure that your machine and computer are turned on.
2Place a single document face down on the document glass. OR load the document(s) face up into the DADF.
3Start Applications and click Image Capture.
4Click Devices and click Browse Devices.
5For MAC OS X 10.4:
Select your machine in Twain devices option. Make sure that Use TWAIN software checkbox is checked, and click Connect.
For MAC OS X 10.5:
Make sure that Connected checkbox is checked beside your machine in Bonjour Devices.
If you want to scan using TWAIN, refer to the MAC OS X 10.4 procedure above.
6Set the scan options on this program.
7Scan and save your scanned image.
NOTE:
•If you want to scan via the DADF, use
•For more information about using Image Capture, please refer to the Image Capture’s help.
•You can also scan using
•Scan process differ according to
•If scanning does not operate in Image Capture, update Mac OS to the latest version. Image Capture operates propery in Mac OS 10.3.9 or higher and Mac OS 10.4.7 or higher.
Setting scan information in Scan Manager.
You can find out about Scan Manager program information and installed scan driver's condition. Also, you can change scan settings and add or delete the folders where scanned documents to computer are save in Scan Manager program.
1Open Scan Manager in Smart Panel menu on Status bar.
2Set Scan Button allows you to change the saving
destination and scan settings, add or delete application program and format files. You can change the scanning machine by using Change port. (Local or Network)
3Press OK after setting is done.
47
Using Your Printer with a Macintosh
