Chapter 4 Register Map and Descriptions
©
National Instruments Corporation 4-45 AT-MIO-16X User Manual
DAC1 Register
Writing to the DAC1 Register loads the value written to the analog
output DAC Channel 1 in immediate update mode. If posted u pdate
mode is used, the value written to the DAC1 Register is buffered and
updated to the analog output DAC Channel 1 only after an access to the
DAC Update Register or a timer trigger is received in one of the
prescribed paths.
Address: Base address + 12 (hex)
Type: Write-only
Word Size: 16-bit
Bit Map:
Bit Name Description
15-0 D<15..0> Data bus to the analog output DA Cs. The
data written to the DACs is interpreted in
straight binary form when DAC Channel
1 is configured for unipolar operation.
When DAC Channel 1 is configured for
bipolar operation, the data is interpreted
in two’s complement form.
15
D15
14
D14
13
D13
12
D12
11
D11
10
D10
9
D9
8
D8
7
D7
6
D6
5
D5
4
D4
3
D3
2
D2
1
D1
0
D0
LSBMSB