3.Remove the main and
4.Turn over the MobilePro and locate the screw that secures the ROM or RAM bay cover.
5.Using a small screwdriver, remove the screw and the bay cover. (The MobilePro does not power on when the ROM bay cover is removed.)
6.With the small screwdriver, remove the screw on the ROM or RAM module.
7.Gently lift up the ROM or RAM module to disconnect it from its connector and remove it from the bay.
8.Insert the upgraded ROM or RAM module into the bay, aligning the connector on the module with the one in the bay.
9.Gently press on the module just above the connectors until the connection is secure.
10.Replace the bay cover and cover screw.
11.Install the main and
NOTE
The MobilePro will not power on unless the ROM bay cover is secure and the battery lock is in the locked position.
RESETTING THE MobilePro
Occasionally, you may need to reset your MobilePro H/PC. Before resetting the MobilePro, back up your data to the desktop or notebook computer, if possible.
