TDelete — removes the currently assigned application reference so you can select another application.
ENABLING THE DISPLAY LINKAGE SWITCH
You can configure your MobilePro H/PC to power on or off by simply opening or closing the display cover. The display linkage switch acts as a switch for both the power and the backlight.
Opening the MobilePro powers on the unit. To power on the unit while it is open, use the Power button.
Closing the MobilePro powers off the unit and insures that the backlight is off as well.
Use the following procedure to enable the display linkage switch.
1.Tap Start on the Taskbar to access Settings, then select Control Panel.
2.Double tap on the MobilePro Settings icon to launch the dialog box shown in the following figure.
Be sure you have the “Power Off” tab selected.
Power off settings
