NETGEAR DGND3300-100NAS user manual Name 11N Ssid

N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual

Figure 9.

The settings for this screen are explained in the following table.

Settings	Description
Name (11N SSID)	This is the wireless network name. Enter a 32-character (maximum) name in this
Name (11G SSID)	field. This field is case-sensitive.
	In a setting where there is more than one wireless network, different wireless
	network names provide a means for separating the traffic. Any device that you
	want to participate in a wireless network must use the SSID.
Region	The location where the N300 Wireless Modem Router is used.
Mode	Specify which 802.11 data communications protocol is used. You can select one
	of the following modes:
	• Up to 300 Mbps at 2.4 GHz. Performance mode, using channel expansion to
	achieve the 270 Mbps data rate. The N300 wireless modem router uses the
	channel you selected as the primary channel and expands to the secondary
	channel (primary channel +4 or –4) to achieve a 40 MHz frame-by-frame
	bandwidth. The N300 wireless modem router detects channel usage and
	disables frame-by-frame expansion if the expansion would result in
	interference with the data transmission of other access points or clients.
	• Up to 300 Mbps at 5 GHz and 54 Mbps at 2.4 GHz. This is the default mode,
	which is recommended.
	• Up to 145 Mbps at 2.4 GHz. Neighbor friendly mode, for reduced interference
	with neighboring wireless networks. Provides two transmission streams with
	different data on the same channel at the same time, but also allows 802.11b
	and 802.11g wireless devices.
	• Up to 145 Mbps at 5 GHz and 54 Mbps at 2.4 GHz. Legacy mode, for
	compatibility with the slower 802.11b and 802.11g wireless devices.

Chapter 2. Wireless Settings 19