NETGEAR DGND3300-100NAS user manual To configure a wireless guest network

N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual

Mode in Wireless Settings	Menu Selection	Guest Network Default SSID	Wireless
Screen			Compatibility
Up to 270 Mpbs	Guest Network b/g/n	NETGEAR-2.4G_n_Guest1	• 2.4GHz 802.11n
			• 2.4GHz 802.11g
			• 2.4GHz 802.11b
Up to 145 Mbps at 5 GHz & 54	Guest Network a/n	NETGEAR-2.4G_n_Guest1	• 5GHz 802.11a
Mbps at 2.4 GHz			• 5GHz 802.11n
	Guest Network b/g	NETGEAR-2.4G_g_Guest1	• 2.4GHz 802.11g
			• 2.4GHz 802.11b
Up to 145 Mbps at 2.4 GHz	Guest Network a/n	NETGEAR-2.4G_n_Guest1	• 2.4GHz 802.11n
			• 2.4GHz 802.11g
			• 2.4GHz 802.11b

To configure a wireless guest network:

1.In the main menu, under Setup, select either Wireless Guest Network g/b or Wireless Guest Network a, n. A Wireless Guest Network Settings screen similar to the following figure displays:

Figure 16.

2.Make sure that the Enable Guest Network check box is selected.

3.You can specify whether the SSID broadcast is enabled, and whether you want to allow guests to access your local network.

4.You can also change the guest name in the Guest Wireless Network Name (SSID) field.

Note: NETGEAR strongly recommends that you change the default guest network name (SSID) from the default name to a different name. Note that the name is case-sensitive. For example, GuestNetwork is not the same as Guestnetwork.

Chapter 2. Wireless Settings 31