NETGEAR DGND3300-100NAS user manual Security Policy settings, Client-to-Gateway a

N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual

g.Enter the public WAN IP address of the N300 wireless modem router in the field directly below the ID Type drop-down list. In this example, 22.23.24.25 is used.

The resulting connection settings are shown in Figure 52 on page 85.

3.Configure the security policy in the NETGEAR ProSafe VPN Client software:

a.In the Network Security Policy list, expand the new connection by double-clicking its name or clicking the + symbol. My Identity and Security Policy subheadings appear below the connection name.

b.Click the Security Policy subheading to view the Security Policy settings.

Figure 52. Security Policy settings, Client-to-Gateway A

c.In the Select Phase 1 Negotiation Mode section of the screen, select the Main Mode radio button.

4.Configure the VPN client identity.

In this step, you provide information about the remote VPN client PC. You must provide the pre-shared key that you configured in the N300 wireless modem router and either a fixed IP address or a fixed virtual IP address of the VPN client PC.

Chapter 6. Virtual Private Networking 85