7-60 User’s Reference Guide

3.Select the Router’s time zone from the Time Zone pop-up menu and press Return.

4.In the NTP Update Interval field, enter how often to synchronize with the time server, using the format HHHH:MM where H is hours and M is minutes.

5.Select a System Date Format; the options are MM/DD/YY, DD/MM/YY, and YY/MM/DD, where M is month, D is day, and Y is year.

6.Select a System Time Format, either AM/PM or 24hrs.

7.Press Escape to return to the System Configuration menu.

Console configuration

You can change the default terminal communications parameters to suit your requirements.

To go to the Console Configuration screen, select Console Configuration in the System Configuration screen.

Console Configuration

Baud Rate...

57600

SET CONFIG NOW

CANCEL

Follow these steps to change a parameter’s value:

1.Select 57600, 38400, 19200, or 9600.

2.Select SET CONFIG NOW to save the new parameter settings. Select CANCEL to leave the parameter unchanged and exit the Console Configuration screen.

SNMP (Simple Network Management Protocol)

These screens allow you to monitor and configure your network by means of a standard Simple Network Management Protocol (SNMP) agent.

Details are given in “SNMP” on page 12-188.

Page 60
Image 60
Netopia 4553 manual Console configuration, Snmp Simple Network Management Protocol