7-50 User’s Reference Guide
Modifying a scheduled connection
To modify a scheduled connection, select Display/Change Scheduled Connection in the Scheduled Connections screen to display a table of scheduled connections.
Select a scheduled connection from the table and press Return. The Change Scheduled Connection screen appears. The parameters in this screen are the same as the ones in the Add Scheduled Connection screen (except that ADD SCHEDULED CONNECTION and CANCEL do not appear). To find out how to set them, see “Adding a scheduled connection” on page
Deleting a scheduled connection
To delete a scheduled connection, select Delete Scheduled Connection in the Scheduled Connections screen to display a table of scheduled connections.
Select a scheduled connection from the table and press the Return key to delete it. To exit the table without deleting the selected scheduled connection, press the Escape key.
Frame Relay configuration
If the mode is HDLC and you choose Frame Relay as the datalink encapsulation type you can configure the Frame Relay options from the WAN Configuration menu.
Main
Menu
WAN
Configuration
•Frame Relay Configuration
•Frame Relay DLCI Configuration
WAN Configuration |
|
WAN (Wide Area Network) Setup... |
|
Display/Change Connection Profile... |
|
Add Connection Profile... |
|
Delete Connection Profile... |
|
WAN Default Profile... |
|
ATMP/PPTP Default Profile... |
|
Scheduled Connections... |
|
Configuration Changes Reset WAN Connection: | Yes |
Frame Relay Configuration... |
|
Frame Relay DLCI Configuration... |
|
From the WAN Configuration screen, select WAN Setup, then select the Frame Relay Configuration option and press Return. The Frame Relay Configuration screen appears.
