Netopia 4553 manual Current status, Status lights

Monitoring Tools 12-181

Current status

The current status section is a table showing the current status of the DSL connection. For example:

		Current DSL Status
Profile Name----------	Rate--	%Use-Remote Address-----	Est.-More Info------------
ISP	1536	10 IP 92.163.4.1	Lcl NAT 192.163.100.6

Profile Name: Lists the name of the connection profile being used, if any.

Rate: Shows the line rate for this connection.

%Use: Indicates the average percent utilization of the maximum capacity of the channels in use for the connection.

Remote Address: Shows the IP address of the connected remote router.

Est: Indicates whether the connection was locally (“Lcl”) or remotely (“Rmt”) established.

More Info: Indicates the NAT address in use for this connection.

Status lights

This section shows the current real-time status of the Netopia 4553’s status lights (LEDs). It is useful for remotely monitoring the router’s status. The Quick View screen’s arrangement of LEDs corresponds to the physical arrangement of LEDs on the router.

			LED Status
-PWR----	ERROR----	ETHERNET----	DSL- - - - - - - - - - - -	+--------	LEDS---------
				'-'= Off 'G'= Green
G	-	-	-	'R'= Red 'Y'= Yellow

Each LED representation can report one of four states:

–:The LED is off.

R:The LED is red.

G:The LED is green.

Y:The LED is yellow.

The section “Netopia 4553 Router status lights” on page 2-13describes the meanings of the colors for each LED.