Nortel Mobile Headset Adapter properties | Nortel Networks 1140E

Configuring Local Menu options

headset since this choice has been moved to the Headset menu.

•Users of USB Audio on an IP Phone 1120E or IP Phone 1140E when connected to a BCM system may experience constant beeping from the wireless headsets if the user inadvertently hits a call control keys in error.

•For the Nortel USB Adapters it is a requirement that the firmware of this device be V2.0.32 or later.

•For the Algo 4900 USB ATA it is a requirement that the firmware of this device be v1.00.32 or later.

•The Algo 4900 USB ATA is classified as a high power USB device and must be connected to the phone through a powered USB hub.

•The Plantronics CS50-USB and CS60-USB must be AC powered prior to connecting them to phone.

•For the Plantronics CS50-USB and CS60-USB please make sure the headset base is in ready mode (i.e. the green LED on the right hand side of the headset cradle is solid) before using the headset.

•For the Plantronics CS50-USB and CS60-USB the On Hook/Off Hook button must be depressed for 3 seconds to go off hook.

•At the time of this writing, GN Netcom produces four models of the Jabra GN9300 series headsets: Jabra GN9330, Jabra GN 9330E, Jabra GN 9350 and Jabra GN9350E. The USB Audio feature in the IP Phones only supports the Jabra GN9330E and Jabra GN9350E connected via USB.

•For the GN Netcom 9300 series occasionally a single ring is lost between the phone and the headset but is recovered at the next ring.

•For the GN Netcom 9300 series occasionally a drop in audio quality may be experienced when a 3-way conference is established.

Nortel Mobile Headset Adapter properties

You can use the Nortel Mobile Headset Adapter to answer calls whenever the IP Phone 1140E is running.

To access the Nortel Mobile Headset Adapter (MHA) properties, press the Services key twice to open the Local Tools menu, press the 1 key on

65

Image 65

Nortel Networks 1140E manual Nortel Mobile Headset Adapter properties

Contents

IP Phone 1140E Page Revision history Revision history Contents Making a call Configuring Local Menu options While away from your desk Incoming calls Additional phone features Additional call featuresTalking with more than one person Working without interruption 173 Using Hospitality features169 Contents About the Nortel IP Phone 1140E Basic features About the Nortel IP Phone 1140E IP Phone 1140E Context-sensitive soft keys are located Telephone controls About the Nortel IP Phone 1140E Use the Enter key, at the center About the Nortel IP Phone 1140E About the Nortel IP Phone 1140E About the Nortel IP Phone 1140E Telephone display Call features and Flexible Feature Codes Using encrypted calling Security featuresManaging your Station Control Password Scpw To change your Scpw To turn Password Protection on or off Highlight New Password Mode Enable Password Protection Disable Password Protection Application text entry Entering text using the IP phone dialpadEntering and editing text USB keyboard function keys during IP Phone calls Entering text using the USB keyboardEditing text using the soft keys Editing soft key description To edit text with the soft keys IP Phone 1140E connections Connecting the components Before you begin Connecting the components of the phone Release the IP Phone 1140E from the stand Remove the stand cover Connecting the components Cable routing tracks and mounting holes Connecting the components Telephone Options menu Configuring Telephone Options To use the Telephone Options menu Using the Telephone Options menu Telephone Options menu Adjusting the volumeTo adjust the volume Adjusting the display screen contrast Language… To adjust the display screen contrastSelecting a language To select a date and time format Selecting date and time formatTo select a language Choosing a local dialpad tone Accessing display diagnosticsTo use Display diagnostics To choose a local dialpad tone Viewing IP Phone information To view IP Phone information DiagnosticsTo view diagnostic information To log only unanswered calls Configuring call log optionsConfiguring the Callers List log New call indication off New call indication on Configuring New Call IndicationTo configure New Call Indication To configure Preferred Name Match Configuring Preferred Name MatchConfiguring Area Code Setup Preferred name match on Preferred name match off To configure default area codes maximum of three Ring type… Choosing a ring typeTo edit area code display To select a ring type Enabling or disabling Call TimerTo enable or disable Call Timer Changing feature key labels Enabling OnHook Default PathTo enable OnHook Default Path Handsfree enable Headset enable To rename the labels To restore the default labels To configure name display format Configuring the name display format First name, last name Last name, first name Configuring Live DialpadTo configure Live Dialpad Number, name default Name, number Configuring Caller ID display orderConfiguring Normal mode indication Off Enter key Configuring Local Menu optionsNavigation key functions in menus Part 1 Navigation key functions in dialog boxes Navigation key functions in Edit mode Part 1Navigation key functions in menus Part 2 Changing 1. Display Settings Using the 1. Preferences submenuNavigation key functions in Edit mode Part 2 Display Settings Contrast Sleep To adjust Contrast or Sleep settingsChanging 2. Language Language Configuring 3. HeadsetsTo select the language used in local menus Selecting Active Headset Devicee To select the active headset device Enabling HID CommandsTo enable HID Commands Enabling USB Headset Select the Enable HID Commands checkboxTo enable USB headset Configuring Local Menu options Configuring Local Menu options Limitations and Advisories Nortel Mobile Headset Adapter properties Nortel Mobile Headset Adaptor elements and functions Configuring 4. Bluetooth To pair a wireless headset with your phone Configuring Local Menu options Configuring Local Menu options Configuring Local Menu options Configuring Local Menu options Configuring Local Menu options Configuring Local Menu options Dual Pairing Headsets To switch between a wired headset and a wireless headset Interaction with wired headsets To unpair a wireless headset Configuring Local Menu options Using 1. IP Set&DHCP Information Using the 2. Local Diagnostics submenuUsing 2. Network Diagnostic Tools Using 3. Ethernet Statistics Using the 4. Lock Menu Using the 3. Network Configuration menuUsing 5. USB Devices USB Devices Making a call Using Off-hook dialing Using On-hook dialing To mute a handsfree call Using handsfree dialingTo discontinue a handsfree call To switch from handset mode to handsfree mode To switch from handsfree to handset modeTo use a headset To release a call Making a call using the Corporate Directory Using the Directory applicationsTo switch from handsfree to headset To search for a specific number To scroll to a specific number Making a call using the Personal Directory To make a call using the Personal Directory Making a call using the Callers ListTo make a call using the Callers List Callers List Making a call using the Redial List Using PredialTo make a call using the Redial List To use Predial To store an AutoDial number Using AutoDialTo edit a Predial number To use AutoDial To display an AutoDial number To call a Ring Again party when you receive notification Using Ring AgainTo activate Ring Again Enter the Ring Again Activate FFC Using Speed Call Using Last Number RedialTo deactivate Ring Again before notification Press the Ring Again Deactivate FFC Press the Speed Call Controller soft key To store a Speed Call numberTo make a Speed Call Using intercom calling Using System Speed CallUsing HotLine To make an intercom call To answer a call Answering a call Placing a call on hold While on an active callTo place a call on hold To retrieve a call on hold Directory , Redial List , or Callers List Transferring a callTo transfer a call to a third party To use Timed Reminder Recall Using Timed Reminder Recall To contact the attendant while on a call Using Attendant RecallUsing Call Park To park a call on the System Park DN or your own DN System Park DN is enabled toTo park a call using the Spre code or FFC To retrieve a parked call To record a caller number for accounting purposes Recording a Calling Party NumberDisplaying incoming calls To use Call Trace without a Call Trace key Tracing a malicious callTo use Call Trace while on a call Using Call Pickup Using Automatic AnswerbackIncoming calls Press the Automatic Answerback key Enter the Pickup Directory Number FFC Enter the Pickup Ringing Number FFCTo answer an incoming call in another call pickup group To return to the first IP Phone call Using Call WaitingTo answer an incoming call while on another call If you do not have a Call Waiting key To forward your calls or change the forward number Using Call ForwardWhile away from your desk Internal Call Forward Activate FFC Using Internal Call ForwardPress the Internal Call Forward key To deactivate Internal Call Forward Using Remote Call ForwardInternal Call Forward Deactivate FFC To activate Remote Call Forward To deactivate Remote Call Forward To lock your IP Phone Securing your IP Phone To unlock your IP Phone Talking with more than one person Using the Call Join featureSetting up a conference call To set up a conference call To view active conferees Using Conferee Selectable Display To call group members Using Group CallTo disconnect a conferee To answer a group call Group Call FFC To end a group call Working without interruption Using Make Set BusyTo activate Make Set Busy To deactivate Make Set Busy Using AutoDial Transfer Additional call features Using Call Page Connect to make an announcement Using the Buzz signalTo buzz the IP Phone linked to your IP Phone To connect to Call To use Centrex/Exchange Line Switchhook Flash Using Centrex/Exchange Line Switchhook Flash To charge a call in progress Charging a call or charging a forced callDial the Call Detail Recording FFC To charge a call to an account when you transfer a call Transfer soft key To use Enhanced Override Using Enhanced Override To use Forced Camp-on Using Forced Camp-on feature Answering a call camped-on to your extension Overriding a busy signalTo override a busy signal To use Privacy Release in an established state Using Privacy ReleaseUsing Radio To use Automatic Post-selection To use Automatic Preselection Meet-me To answer a Radio Using Voice CallDial the Radio Paging Access FFC. The ringback tone sounds To respond to a voice call To make a voice call To add an entry Additional phone featuresUsing the Personal Directory To edit an entry To search for an entry To delete an entry Using the Callers List To dial an entry To delete the entire Callers List Using the Redial List To delete the entire Redial List Virtual Office connection availability Using Virtual Office Logging in to Virtual Office Using Virtual Office on your Remote IP Phone Logged in to an IP Phone 1140E Logged in to an IP Phone 1140E using an IP Softphone Using Virtual Office on your Office IP Phone Office phone displays the message Logged Out To log out from a Remote IP Phone Logging out of Virtual Office Troubleshooting Virtual Office Part 1 Troubleshooting Virtual Office Troubleshooting Virtual Office Part 2 Troubleshooting Virtual Office Part 3 Using Media Gateway 1000BNormal Mode Local Mode Using Resume Normal Mode Using Test Local Mode Troubleshooting MG 1000B Troubleshooting MG 1000B Configuring Automatic Wake-Up Using Hospitality featuresTo enter the time for an Automatic Wake-Up call Dial the Automatic Wake-Up Request Dial the Automatic Wake-Up Quit FFC To cancel an Automatic Wake-Up callTo verify the time for the Automatic Wake-Up call Dial the Automatic Wake-Up Verify To read meters Activating Message RegistrationPress the Message Registration key To change a meter To enter cleaning status Using Maid IdentificationTo reset a meter to zero To display the status of a room Displaying Room Status Changing the status of a room 159 Accessing External Server Applications Flexible Feature Codes Flexible Feature Codes FFCs Flexible Feature Codes FFCs 162 Regulatory and safety information Jurisdiction Standard Description EMC compliance Part 1 EMC compliance Part 2 Safety compliance Other DenAn regulatory notice for Japan Regulatory and safety information 168 Terms you should know Information display 171 172 Index 174 175 Index 176 Page Legal Notice