Nortel Networks 5399 Access Switch Hardware Installation Guide
Chapter2 Installingthe Model5399 Remote Access ConcentratorModule
2-30
Image name: <invalid or uniniti alized> Default:
“oper.64.enet”
Enter Image name::oper.64.e net
Image name: “oper.64.enet”
TFTP load directory:
Enter TFTP load directory::/annex
TFTP Dump path/filename: <uni nitialized> Default :
“dump.134.117.6.34”
Enter TFTP Dump path/filename::/annex/mydumpfile
Using current TFTP Dump path/fi lename.
monitor::
3. Issue the followingcommands to prepare the tftp dump file.
touch /tftpboot/annex/my dumpfile
chmod 622 /tftpboot/annex/m ydumpfile
4. Enter the bootcommand.The boot command displaylooks similar to this:
Enter boot file name[oper.64. enet]::
Waiting for Config Block Info...
Requesting boot file ”oper.64.enet”.
Unanswered requests shownas ’?’,transmission errors
as ’*’.
Requesting boot from 192.9.20 0.88 via Ethernet...
Booting BFS file using open delay of 8?
Booting TFTP file using open delay of 8
Booting TFTP file from 192.9.20 0.88
Header received OK. Recei ved data blocks shown as ’.’.
...........................
...........................
...........................
...........................
...........................
...........................
...........................
...........................
............EOF

Oncethe Remote Access Concentrator is booted,M onitorMode is no

longer operational. The Remote Access Concentrator is up and ru nning,

and the following message is displayed:

Console monitor ready; Press CR to start.