Nortel Networks NN44200-300 manual Network connectivity, BRD20

18 Chapter 2 1002rp server description
		Meridian 1*/
		Communication
Slot	CallPilot-assigned	Server*
number	board labela	1000	T1/SMDI
Slot 13 (PCI Slot 5)	BRD13	MPB16-4 #2	D/480JCT-2T1
		(optional)
Slot 14 (PCI Slot 6)	BRD14	MPB16-4 #2	MPB96 board #2
		(optional) or MPB96	(optional)
		#2 (optional)
Slot 15 (PCI Slot 7)	BRD15	MPB16-4 #2	D/480JCT-2T1
		(optional)	(optional)
Slot 16 (PCI Slot 8)	BRD16	MPB16-4 #2	D/480JCT-2T1
		(optional)	(optional)
Slot 17 (PCI Slot 9)	BRD17	MPB16-4 #2	MPB96 #3 (optional)
		(optional) or MPB96
		#3 (optional)
Slot 18 (PCI Slot	BRD18	MPB16-4 #2	Not used
10)		(optional)
Slot 19 (PCI Slot	BRD19	Not used	Not used
11)
Slot 20 (PCI Slot	BRD20	Not used	Not used
12)

a.On some CallPilot Manager screens, the CallPilot-assigned board label is displayed. This label corresponds to the slot number. For example, BRD12 refers to the board in slot 12.

b.The SBC card includes two onboard NICs (for connection to the ELAN subnet, and the Nortel server subnet) and an onboard video card. The NIC and monitor connectors are on the SBC faceplate.

Network connectivity

Introduction

This section describes how the 1002rp server can be integrated into your network. The integration depends on the type of switch you are using.

ATTENTION

To secure the CallPilot server from unauthorized access, ensure that the CallPilot network is inside your organization’s firewall.

Nortel CallPilot

1002rp Server Hardware Installation

NN44200-300 01.01 Standard

5.0 23 February 2007

Copyright © 2007, Nortel Networks Nortel Networks Confidential