Nortel Networks NN44200-300 manual Copyright 2007, Nortel Networks

57

Appendix A

EMC emission level protection for the 1002rp Server

To lower the EMC emission level, ferrite cores are installed with one loop (see diagram below) on the following external cables:

•Ferrite Core (TDK and part number ZCAT3035-1330) — for the triple DS30X I/O cable (Nortel and part number NTRH2014), at each end of the cable

•Ferrite Core (TDK and part number ZCAT1325-0530) — for the modem power supply cable, at each end of the cable

•Ferrite Core (Fair Rite and part number 0431164181) — for the Trenton combined keyboard and mouse Y connector cable, at the server end of the cable

•Ferrite Core (part number WE 742 7111) — for Ethernet port cat5 UTP cable, at the server end of the cable

CAUTION

The ferrite cores are preinstalled on these customer provided cables. It is not the customer’s responsibility to attach these ferrite cores to these cables. However, the customer should ensure that these ferrites are in place to keep the EMC emission levels low.

Nortel CallPilot

1002rp Server Hardware Installation

NN44200-300 01.01 Standard

5.0 23 February 2007

Copyright © 2007, Nortel Networks Nortel Networks Confidential